APCure GreenFIX-GDL

INVISIBLE WATERPROOF COATING PROCESS FOR GAS DIFFUSION LAYERS

APJeT Plasma Technologies has revolutionized the PTFE coating process with their game-changing GreenFIX™ waterproof coating and APCure™ plasma chemical-curing technology. GreenFIX™ chemistries are exclusively compatible with APCure™ plasma machinery and form an ultra-thin, conformal coating around the fibers, leaving pores open. The final waterproof coating repels as well as traditional PTFE with up to 99% less fluorine and minimal impact on key properties including air permeability, conductivity, and substrate flexibility.

GreenFIX-GDL Chemical Coating

  • Ultra-thin, highly waterproof coating replacement for PTFE
  • Encapsulates individual fibers, maintaining high air permeability
  • Up to 99% less fluorine than traditional PTFE coatings
  • Maintains the high conductivity of the base material
  • No impact on substrate flexibility
  • Solvent-free chemical formulation 

APCure Plasma Chemical-Curing Machinery

  • Cures GreenFIX chemistry at room temperature and pressure
  • Compact, roll-to-roll machinery
  • Line speeds up to 10mpm
  • Handles roll widths up to 2 meters
  • Up to 50% reduction in cost over conventional processing

REDUCE FLUORINE

Fluorine concentration can be drastically reduced, up to 99%, without sacrificing waterproof performance with APJeT’s APCure Plasma Machinery and GreenFIX-GDL chemistry.

*94% Less Fluorine

Small clear glass bowl resting on a textured gray carpet.
Small, transparent ring-shaped bead resting on a dark, textured surface.
GreenFIX-GDL
(on P75 paper)
GDS2120
(MPL+PTFE)

AvCarb P75 Paper

*96% Less Fluorine

Clear glass marble resting on a gray textured surface, reflecting light.
Small white seashell resting on a gray textured surface.
GreenFIX-GDL
(on TGPH060)
TGPH060
(MPL+PTFE)

Toray TGPH60 Paper

*99% Less Fluorine

Clear glass marble resting on a textured brown fabric surface.
Tiny metal fastener (small screw/rivet) with a round head lying on a dark textured surface.
GreenFIX-GDL
(on W0S01011)
W1S1011
(MPL+PTFE)

CeTech Carbon Cloth

Eight‑meter long industrial processing line featuring APJet APCure equipment, conveyors, and safety rails with a technician standing nearby.

The APJeT APCure system can handle web goods up to 2 meters in width and runs at line speeds of 10mpm.

The machinery fits easily into existing facilities and process lines, with a typical length of only 8 meters.

IMPROVE GAS PERMEABILITY

APJeT’s revolutionary GreenFIX-GDL coating maintains a gas permeability similar to the base material while providing a high degree of waterproof performance.

The waterproof coating encapsulates the fibers leaving the existing pores open and available for maximum gas and water transport. 

REDUCE RESISTIVITY

APJeT’s GreenFIX-GDL coating eliminates the conductive losses expected with a traditional waterproof coating. The final waterproof GDL substrate maintains a high degree of conductivity without any need for MPL.

These improvements in conductivity enable the use of a thinner starting carbon material, allowing for more GDLs per unit area and a higher efficiency fuel cell. 

Bar chart titled 'Electrical Resistivity of GreenFIX-GDL' showing resistivity (mΩ·cm²) for three substrates—AvCarb EP40 Paper, AvCarb P75 Paper, and CeTech Cloth—with four series: Base (blue), PTFE (dark gray), PTFE + MPL (light gray), and GreenFIX-GDL (green).

IMPROVE GAS PERMEABILITY

The secret to APJeT’s exceptional performance is the creation of a conformal coating that encapsulates fibers rather than clogging pores, providing full waterproof performance without reducing porosity. 

CeTech Cloth Base sample — close-up fabric texture with dark and light speckles, blue frame area behind the swatch (left).

CeTech Cloth

Toray TGP60 paper base: dense tangled fiber network (SEM), 200 μm scale.

Toray TGPH060

Interested in our GreenFIX-GDL coating?

We'll reach out to you shortly to set up a meeting and arrange for sampling.

Name:
Would you like to sample our GreenFIX-GDL coating?
Hydrogen Technology Expo World banner: Oct 20–22, 2026 in Hamburg, Germany; stand 7G60; register for free.
google0c6f1dfbf2513b18.html

Plasma Coating & Curing

APJeT®’s plasma finishing involves a reaction between the plasma, a substrate, and a chemical to create a coating or finish on the surface of the substrate. Each APJeT® finish is achieved with a proprietary blend of chemistry tailored to achieve the desired performance on the substrate.

First, the chemistry is applied to the surface of the substrate using a chemical applicator, such as a roll coater, sprayer, or digital printer (DriStream™). No wastewater is produced during this chemical application process.

Next, the substrate enters the plasma region where the chemistry is cured to the substrate without any heat or elevated temperatures. Due to the elimination of heat and water, the APJeT® process provides both a cost savings and environmental benefit.

APJeT®’s proprietary GreenFIX™ chemical formulations include: durable water repellent, anti-microbial, wicking, fire resistance, release, and more. 

Hydrogen Technology Expo World banner: Oct 20–22, 2026 in Hamburg, Germany; stand 7G60; register for free.